NV Woodwerks header image

Mounting Your Pressure Pot

– Posted in: Videos

I’ve found that mounting a pressure pot makes it much easier to use and far quicker to get the lid clamped down. When casting fast setting resins like Alumilite White with a 2 minute open time, every second I can shave off helps a ton!

Bracket feet like those found on the CA Technologies pots make mounting super easy with just a couple screws and washers. It really comes in handy when mounting a pot on it’s side as well.

I have found that having bracket feet on a pressure pot is a must-have feature for me. Although I swear by CA Technologies pots, you can find this feature on a couple other pressure pots on the market as well.

Related Posts

  • Dave Roush August 24, 2015, 6:50 PM

    Let’s be at least a little bit honest, the brackets at the bottom were originally for casters, you are just utilizing them for a different purpose. Which also explains why the brackets are not flush with the bottom of the pot.

    • Zac Higgins August 24, 2015, 10:34 PM

      You’re right! Maybe I should have read the instructions LOL

  • Dave Roush August 25, 2015, 4:03 AM

    It was in your original video post about setting up your new CA – pot, the casters were shipped inside the pot and you tossed them on camera while saying you didn’t need those, you did the same thing for the instructions too as I recall.
    Thanks for answering I was beginning to think this was a one-way communications channel.


Leave a Comment

Cancel reply