“Aqua” Pen Blanks


“Aqua” blanks started off as a custom order that I liked so much I had to add them to my inventory! Thanks for coming up with a great color combination Susan 🙂

Aqua blanks use a Clear resin base that ends up being slightly translucent providing great depth of color and excellent shimmer from the pearl in the aqua resin and the silver too. In some cases, there could be small areas that are transparent. This may cause small areas where a brass tube could be seen. I would suggest painting the tube or using silver colored tubes to mask it, but the majority of the blank is opaque enough to cover the tube.


Availability: In stock

SKU: PBCS-006 Category:

Aqua & Silver Color Swirl

Each blank is 100% unique, but the colors remain constant due to the extensive testing and documentation of specific color recipes. Standard pen blank sizes are 5″ x 3/4″ x 3/4″, and prices are per blank.

The Alumilite Advantage!
Alumilite is by far the best resin I’ve found for casting pen blanks. It’s a joy to turn, yet it polishes up to a high gloss. Finishing these blanks doesn’t get any simpler! Just sand it up to a high grit or use micro mesh pads, then finish it off with some plastic polish or on a buffing wheel.

GOOD BYE CHIPOUT!! Alumilite blanks are not brittle like many of the mass produced or polyester resin blanks on the market. The blanks are cast under pressure to ensure there are no voids or trapped air bubbles in the blanks.

Dimensions 5 × .75 × .75 in

Blue, Green, Aqua, Silver


There are no reviews yet.

Be the first to review ““Aqua” Pen Blanks”

Your email address will not be published. Required fields are marked *

Shopping Cart
There are no products in the cart!
Continue Shopping
Scroll to Top